To set up the DICOM printing parameters, select the Network menu and the DICOM printer setup... item. The window shown in Fig. 16.4 will be displayed.
To add a DICOM printer to the list:
All the added printers will appear on the printer list. The default printer can be assigned directly from the list by checking the box next to the printer.
To delete a printer from the list, select it and click the Remove printer button. Click
OK in the confirmation dialog to delete the printer or Cancel to cancel the deletion.
To edit the printer settings, select the printer and click the Edit printer button.
To check whether a printer is available, select it and click the Info printer button. If the
printer is available, the printer list will display the Online status for the printer. If not,
the Offline status will be displayed. If the status has not been checked, its value will be
Unknown.
To set up the DICOM printing parameters, select the Network menu and the DICOM Printer setup... item. The window shown in Fig. 16.4 will pop up. Set the required parameters on the printing setup panel:
You can also specify the film size in the tab for setting the page templates. If the Chosen film size for printer parameter has been chosen, the size of the film will be as set for your printer. Otherwise, the size of the page template will be used (see Section 16.2.2).
You can print images on a DICOM printer from the DICOM preview window (see Section 16.2). To
open it select the File menu and the DICOM Preview item. To print images on a DICOM printer,
click the DICOM print button on the toolbar. The window shown in Fig. 16.6 will be
displayed.
The parameters in the window correspond to the default parameters specified during the printing setup. Change these parameters if necessary and click the Print button to initiate the printing or Cancel to cancel.
If the printer is not available the message like Pinter "PrinterName" is not available will be displayed.